Epoxy Coating in Franklin County, OH

Yes, after repair. The pitted areas are ground back to sound concrete and filled, so the coating sits on a solid base. A full-broadcast flake floor then hides small texture and color differences well. The polyaspartic topcoat resists salt, so the new surface holds up much better than bare concrete.

A properly installed system is far less likely to lift. Store kits are thin and usually go over a slab that was only etched. Diamond grinding gives the coating a real profile to bond to, and the thicker build and topcoat handle hot tires much better. The old coating gets ground off first.

An industrial high-build epoxy with a chemical-resistant topcoat is the usual choice for repair bays. It resists oil, fluids and dropped tools, and spills wipe up off the surface. A cove base along the walls makes wash-down easier. We'll ask which chemicals you use so the system matches them.

It can work well with the right prep. A moisture test shows how much vapor comes through the slab. If readings are high, a moisture-tolerant primer goes on before the epoxy to help prevent bubbling or peeling. Standing water or leaks have to be fixed first, since no coating can stop active water.

It can be as bold or as calm as you want. Metallic epoxy comes in soft grays and earth tones as well as bright colors. Each floor has its own swirl pattern, so it looks custom. Many people use it in basement bars or theater rooms. Ask to see samples at the estimate.

Workshops with heavy benches and rolling tool chests do best with a high-build system. The thicker layer handles impact and dropped parts better than a thin coat. A flake broadcast adds grip and hides scuffs. The estimate looks at what you store and how you work before suggesting a system.

Epoxy is a common pick for commercial kitchens because it seals the slab and cleans easily. Adding a cove base along the walls removes the corner where grime collects. A textured topcoat helps with slips. Check with your local health department for any specific rules, and we can build the system around them.

Usually a few days after the final coat. You can walk on the floor within about a day, but tires need the coating to cure longer. Cold weather can stretch that time a little. We'll give you a clear date before the job starts.

Industrial high-build epoxy can take forklift traffic when the slab is prepped well. Many large warehouses use polished concrete on the main floor and epoxy in specific zones, like battery charging areas, aisles that need color striping or rooms with chemicals. We'll look at your traffic and suggest where each one fits.

In Franklin County, Concrete Polish and Epoxy Ohio installs epoxy for homes and businesses from Westerville to Obetz. Older basements in Clintonville and the Hilltop often need patching and moisture work, while newer New Albany garages prep easily for flake or polyaspartic coatings. We start with a free estimate, a moisture test and a written quote.