Concrete Resurfacing in Columbus, OH

Often it doesn't. Surface scaling, pop-outs and hairline cracks are good candidates for a bonded overlay once the weak concrete is ground off. If the slab has sunk, heaved or has wide structural cracks, an overlay won't fix that, and you'll hear honestly when replacement makes more sense.

A well bonded overlay on a sound slab can last many years, and resealing on a regular schedule stretches that further. Prep matters most. Overlays fail when they go over dirty, weak or moving concrete, which is why so much time goes into the base.

Often, yes. A worn or heavily patched commercial slab can get a cement-based self-leveling topping or polishable overlay, which is ground and polished like new concrete once it cures. It gives a flat, even surface without tearing out the slab. The existing floor has to be sound and well bonded underneath, which the estimate checks.

In most cases, yes, since there's no demolition, hauling or new pour. The final number depends on size, how much repair the slab needs and the finish you pick. You'll get a free written quote after we see it.

Foot traffic is usually fine within a day, and vehicles typically wait a few days. Temperature, humidity and the product used affect cure time, so you'll get exact timing for your job before the crew leaves.

Yes. A smooth overlay makes a great base for epoxy or a sealed finish, and it's a common fix in older basements and garages with patches, divots and uneven areas. The overlay cures, then the coating goes on top.

Moving cracks and control joints can telegraph through any overlay, so joints are honored and active cracks are treated during prep. Small cracks that aren't moving are filled and generally stay hidden.

Many commercial resurfacing jobs are phased by area or scheduled after hours. Fast-setting materials help get sections back in use quickly. The sequence is planned with you so the disruption is as small as it can be.

Usually, yes. Once the adhesive and loose patches are ground off, a thin cement-based overlay or self-leveling topping gives the room one even surface. From there it can be polished, stained, sealed or coated, depending on the look you want. Cracks that still move get treated first so they're less likely to show through.

Yes. An overlay can be left with a light texture, and a sealer or coating with anti-slip grit goes over the top. More texture gives better grip around floor drains, wash bays and garage doors where water collects, and smoother finishes suit basements and showrooms that stay dry. We match the texture to how each area is used.