Concrete Polishing & Epoxy Flooring in Canal Winchester, OH

Usually right away, since most new homes are past the first month of concrete curing by closing day. A moisture test confirms the slab is ready. Then the surface is ground to remove the curing compound and open the pores, and the coating goes down.

Yes, it does. Coatings and polish both need bare concrete, so old paint is ground off first. That step also shows any cracks or soft spots hiding under the paint, and those get repaired before anything new goes on.

It usually is. Grinding removes the weak top layer and a lithium densifier hardens what's left, which is what stops the dusting. You end up with a slab that scrubs clean and reflects more light, with no coating to wear through under forklifts.

Both can work, and the slab often decides. A dry, sound basement slab polishes nicely and can be stained a warm tone. If the floor has patches, old adhesive or higher moisture, a coating over a moisture-tolerant primer hides more and still looks finished.

Yes, in most cases. Pitted and spalled areas are ground out and filled with a repair mortar, then the floor gets a flake epoxy system with a topcoat. Once sealed, salt and brine sit on the surface and rinse off.

Usually no. Shrinkage cracks in young slabs are very common and most stop moving early on. They get cleaned out and filled before coating, and a flake finish hides them well. A crack that keeps widening is something you'll hear about at the estimate.

Often it can. Smaller retail floors can be ground and coated over a weekend or split into sections. Polishing makes little mess thanks to dust collection on the grinders. The schedule gets set with you before work starts.

It can without texture, so add it. A flake broadcast gives natural grip, and a fine anti-slip additive can go in the topcoat. That combination handles slush and meltwater well and still cleans easily with a squeegee.

Dust mop daily and damp mop with a neutral cleaner. Skip harsh acids and vinegar, which dull the shine. Larger spaces can use an auto-scrubber with a soft pad, and the floor never needs wax or stripping.

Concrete Polish and Epoxy Ohio installs flake epoxy garage floors in Canal Winchester, where the growing subdivisions have smooth new slabs that need only grinding before coating. Older garages near downtown may need paint removal and crack filling first. You get a written quote after a moisture test, and the in-house crew does all of it.