Concrete Polishing & Epoxy Flooring in Franklin County, OH

Very likely, yes. We work across Franklin County, from Westerville and Dublin to Grove City, Canal Winchester and Groveport. Our shop is on Westerville Road in northeast Columbus, so most addresses in the county are a short drive. Call (614) 715-7108 with your address and we'll confirm.

Polished concrete is usually the best fit for a large warehouse slab with forklift traffic. Grinding and a lithium densifier harden the surface and stop the dusting, and there is no coating to wear through or peel. Areas around charging stations or with chemical exposure may get an industrial epoxy. The estimate covers both options.

Often it can. The old paint has to be ground off first so the new system bonds to bare concrete. Then the slab gets a moisture test. If readings are high, a moisture-tolerant primer goes down before the epoxy. Active water coming in through cracks or the wall needs fixing before any floor work.

Concrete Polish and Epoxy Ohio coats garage floors across Franklin County, from Upper Arlington and Worthington to Reynoldsburg and Grove City. Because our shop is on Westerville Road, the whole county is home ground for the crew. Flake epoxy is the usual pick, since it hides dirt and stands up to road salt, and every job starts with a free on-site estimate.

Polished concrete is usually less slippery than people expect, since the shine comes from refined concrete with no coating on top. Like any smooth floor, it gets slicker with grease or water. A lower sheen and good mats at entries and the dish area help. We can talk through slip concerns during the estimate.

Concrete Polish and Epoxy Ohio polishes warehouse floors in Franklin County, including the large distribution buildings around Rickenbacker in the southeast part of the county. Big open slabs suit polished concrete well, and our in-house crew grinds, densifies and polishes them in sections. A free estimate, moisture test and written quote come before any work.

Fresh concrete needs time to cure before any coating, often around a month, and moisture testing confirms when it is ready. Polishing can sometimes happen earlier in a build, which is why some owners plan it into the construction schedule. Tell us your pour date and we'll work out timing with your builder.

Yes. The on-site estimate, the moisture test and the written quote are free anywhere we serve, and that includes Canal Winchester, Groveport and the rest of Franklin County. There is no pressure to book. You get a clear quote and decide on your own time.

Yes, once the damage is repaired. Spalled and flaking spots are ground back to sound concrete and filled with a repair material. Then the epoxy and topcoat go on. A flake finish hides minor texture well and handles winter salt. Deep damage may need resurfacing first, and we'll tell you if that's the case.

Both polished concrete and epoxy are low upkeep. Polished concrete needs dust mopping and an occasional auto-scrub with a neutral cleaner. Epoxy cleans just as easily and adds color and coverage over a rough slab. Gym areas with dropped weights often need rubber matting over either one. The best choice depends on the slab and the look you want.