Epoxy Coating in Obetz, OH

Yes, with proper prep. The slab is ground, degreased and ground again until clean concrete shows. Once the coating bonds, cutting oil stays on top and wipes up with a rag.

Concrete Polish and Epoxy Ohio coats garage floors in Obetz, from older detached garages with salt damage by the door to attached garages in newer houses. Older slabs get ground, repaired and covered with flake epoxy that holds up to cars, bikes and storage. Our own crew handles the install from our office on Westerville Road.

Yes, every time. Damaged concrete at the door is ground out and rebuilt with a repair mortar before any coating goes on. The coating then seals that edge, so salt water stops soaking in and breaking the concrete down further.

Obetz shops and production areas that deal with oil, coolant or cleaners get chemical-resistant epoxy from Concrete Polish and Epoxy Ohio. Homes nearby usually want a garage or basement that looks finished and cleans up after winter. We coat residential and commercial floors, and every customer gets a written quote before work starts.

Normal room heat isn't a problem for a properly cured epoxy, even on hot summer days. Hot processes, ovens or heavy thermal loads near the floor may call for a higher-heat system. That gets checked during the estimate walk-through.

Yes, metallic epoxy suits a basement bar well. The pour needs a flat, carefully prepared slab, because dips and humps show through the swirl pattern, so some leveling may come first. Older Obetz basements get a moisture test before any decorative coat, since vapor can cloud or lift the finish.

Yes, with a high-build system. Thicker epoxy handles pallet jacks, carts and foot traffic in loading areas well. Very heavy impacts from dropped steel can chip any coating, but small chips are easy to patch and blend in.

Yes. Tile in Obetz locker rooms and restrooms often hides a decent slab. After demolition, the old setting bed is ground down and low spots are filled. Epoxy then runs across the floor and curves up the walls as an integral cove, sealing the corners where moisture and grime gather. Grout lines stop being a cleaning chore.

Flake is the most popular choice for garages because it hides dirt and tire marks and adds grip. Solid color looks crisp but shows dust and scuffs sooner. You'll see sample chips of both at the estimate to compare.

It often can. A moisture test measures how much vapor rises through your Obetz warehouse slab. Low to moderate readings are handled with a moisture-tolerant epoxy primer under the main coats. Very high readings call for a vapor mitigation system first, or polishing may suit the area better. The test result guides the plan.