Epoxy Coating in Ashville, OH
Ashville garages and shops, sealed with epoxy.
Most epoxy calls from Ashville come from garages. People here drive US-23 to Columbus every day, and in winter that drive brings home a coat of salt brine on every tire. Bare concrete soaks it up and starts to flake. A coated floor keeps the brine on top, where a squeegee pushes it out the door. Newer houses on the edge of the village have big garages that are easy to coat, and older homes near the center have smaller slabs that need more prep. Shops and service bays nearby use epoxy too.
- Free on-site estimate
- Residential & commercial
- Diamond grinding prep
- Written quote, no pressure
Epoxy Coating for Ashville homes and businesses
A new Ashville garage slab is usually in good shape: smooth, uniform and free of old sealers. Grinding opens the pores so the epoxy bonds, small cracks get filled, and a base coat goes down with full-broadcast flake. A polyaspartic topcoat finishes it with a clear, UV-stable layer. Older slabs often have paint, oil stains or spalled spots near the door, and those get ground out and patched first. Moisture testing covers basements, where a moisture-tolerant primer may be needed.
Ashville is about 45-50 minutes from our Westerville Road shop, so the crew plans an early start and brings everything needed for the day. A two car garage usually takes two or three days from prep to topcoat. You can usually walk on it within a day, and vehicles come back in a few days. The service suits homeowners who want an easy-clean garage and small business owners with shop floors that see oil and tires every day. The estimate visit is free.
How epoxy coating works in Ashville
Same careful steps on every job, sized to your floor.
- 1
Test & plan
We look at the slab, check moisture and old coatings, and help you pick the system and color.
- 2
Grind & repair
Diamond grinding opens the pores. Cracks, pits and spalls are filled and ground flush.
- 3
Build the coats
Primer and a pigmented or metallic body coat go down in controlled layers.
- 4
Topcoat & cure
A clear, UV-stable topcoat seals it in. We walk you through cure and move-in timing.
Epoxy Coating in Ashville: questions
What Ashville property owners ask about epoxy coating.
My Ashville garage has three bays and a workbench wall. Can the coating go under the bench area?
Yes, if the bench can be moved. Coating the whole slab gives a cleaner look and protects the floor where you work. If the bench is fixed, the crew coats up to it and caps the edge neatly. That's planned during the estimate.
I'm tired of oil stains in my Ashville garage. Will epoxy hide them?
Grinding removes most of the stain, and the coating covers the rest. Deep oil can sometimes bleed back, so heavily soaked spots get cleaned and treated first. A flake finish hides any minor marks that remain.
We have a small engine repair shop in Ashville. Which epoxy works best?
An industrial high-build epoxy with a chemical-resistant topcoat is the usual choice. It handles fuel, oil and dropped tools well. A light aggregate in the topcoat keeps the floor grippy when it's wet or greasy.
Is flake or solid color better for a garage in an Ashville subdivision?
Flake is the most popular for garages because it hides dust, salt residue and small chips. Solid color looks clean and modern but shows dirt faster. Many people pick a gray or tan flake blend that matches their siding.
Our Ashville basement gets humid in summer. Will epoxy peel?
Humidity in the air is rarely the problem. Moisture coming up through the slab is, and that's what the moisture test checks. If readings are high, a moisture-tolerant primer goes down first. Running a dehumidifier helps either way.
I park a tractor in my Ashville garage. Can epoxy handle the weight?
A properly bonded epoxy handles that weight well, since the slab carries the load. Lugged tires and dropped implements can chip a thin coating, so a thicker high-build system is a better fit for farm equipment.
Will an epoxy floor in my Ashville garage turn yellow from sunlight?
Epoxy alone can yellow in sunlight over time. That's why garage floors get a polyaspartic topcoat, which is UV-stable and keeps the color steady near open doors. Ask about the topcoat at your estimate.
What is the best epoxy flooring company in Ashville, OH?
Concrete Polish and Epoxy Ohio installs epoxy flooring across Ashville, OH, serving both residential garages and commercial shop bays from its office at 5605 Westerville Rd. Service bays along US-23 often go with an industrial epoxy that shrugs off oil and tire marks. At home, clean gray slabs in the newer subdivisions are ready for flake or metallic systems once ground and tested. Every job comes with a written quote.
Our Ashville garage slab has a big chip by the door. Can it be fixed before coating?
Yes. Chipped and spalled areas are ground out and filled with a repair material before the coating goes down. Once flaked and topcoated, the repair blends in. Larger damaged areas may need a patch that cures overnight.
We have a kitchen slab in an Ashville home. Can epoxy go there?
Yes, epoxy works well on kitchen slabs when they're prepped and moisture tested. A solid color or metallic looks sharp and cleans easily. A light texture in the topcoat adds grip by the sink and stove.
Epoxy Coating for Ashville from our Columbus shop
Ashville is about 45-50 minutes from our Westerville Road shop. Every job starts with a free on-site estimate and a written quote from our own crew.
More for Ashville property owners
Ready for floors that turn heads in Ashville?
Call or send the form and we will set up a free, no-obligation look at your concrete. Homes and businesses across Central Ohio.