Residential & Commercial Concrete Flooring Serving Columbus & Central Ohio
Free on-site estimatesMon-Fri 8 AM-5 PM
Union County · 2 communities

Epoxy Coating in Union County, OH

Epoxy coatings for Union County garages, farm shops and plants.

Union County floors work hard. Commuters on US-33 between Marysville and Columbus bring salt into their garages every winter. Farm shops and machine sheds collect diesel, hydraulic fluid and mud. Supplier plants and warehouses around the Honda Marysville Auto Plant need floors that handle forklifts and chemicals. Epoxy fits all of those. A full-broadcast flake system with a polyaspartic topcoat is the usual pick for home garages in new Marysville and Dublin-area subdivisions. Industrial high-build epoxy with a cove base suits plants and shops. Basements in older Richwood homes get solid color finishes.

  • Free on-site estimate
  • Residential & commercial
  • Diamond grinding prep
  • Written quote, no pressure
Epoxy coating system, in cross-sectionAfter diamond grinding, a roller lays an epoxy primer, a solid color body coat and a clear glossy topcoat, building the coating up in layers. EPOXY COATING Solid color system, built up in layers 1Grind & profile2Epoxy primer3Color body coat4Clear topcoat
Free On-Site Estimate
Written quote, zero pressure
Get your free estimate

Tell us about the floor. A real person follows up fast.

Please enter your name
Enter a valid phone number
We never share your info. No spam, ever.
Epoxy Coating · Union County

Epoxy Coating for Union County homes and businesses

Every Union County epoxy coating job starts with diamond grinding. It removes curing compounds on new slabs and paint or sealer on older ones, and it opens the concrete so the coating bonds. Cracks, spalls and joints are filled and ground flat. A moisture test follows, and the reading decides whether a moisture-tolerant primer goes down first. Then the body coat goes on with flake, solid color or metallic, and a topcoat finishes it. On plant floors, safety striping and cove base can be part of the same install.

From our Westerville Road shop in northeast Columbus, the Dublin side of Union County is about half an hour away, and Marysville and Plain City take around 45 minutes. Richwood is a bit farther. A two-car garage usually takes a couple of days. You can walk on the floor within about a day, and vehicles return a few days after the final coat. Plant and shop floors can be done on weekends or during shutdowns. Every job starts with a free estimate, a moisture test and a written quote.

Towns we cover in Union County
All 12 ZIP codes in Union County
430074302943036430404304543061430644306743077433404334443358
Not your town? Switch
All 57 communities we serve. Pick one and press Go.
What's Included

What an epoxy coating job in Union County includes

Every Union County project starts with a free visit from our crew. Our crew covers Union County from our Westerville Road shop in northeast Columbus, and the work follows the same scope below, sized to your slab.

Solid color

Clean, bright single color for garages, basements, shops and work areas.

Metallic

Swirled, pearlescent epoxy for showrooms, bars, basements and statement rooms.

Industrial high-build

Thick epoxy and polyaspartic coats for forklifts, carts and chemical spills.

Decorative flake

Vinyl chips broadcast into the base coat for texture. See epoxy flake flooring

How It Works

How epoxy coating works in Union County

Same careful steps on every job, sized to your floor.

  1. 1

    Test & plan

    We look at the slab, check moisture and old coatings, and help you pick the system and color.

  2. 2

    Grind & repair

    Diamond grinding opens the pores. Cracks, pits and spalls are filled and ground flush.

  3. 3

    Build the coats

    Primer and a pigmented or metallic body coat go down in controlled layers.

  4. 4

    Topcoat & cure

    A clear, UV-stable topcoat seals it in. We walk you through cure and move-in timing.

FAQ

Epoxy Coating in Union County: questions

What Union County property owners ask about epoxy coating.

My Union County garage takes salt from the US-33 commute every day. How long will flake epoxy last?

With good prep and a polyaspartic topcoat, a flake floor can last many years in a busy garage. Wear depends on traffic, salt and care. Rinsing salt off during winter helps a lot. If the topcoat dulls after heavy use, it can be refreshed.

Our Union County plant needs safety striping on the floor. Can it be built into the epoxy?

Yes. Striping can be laid out and coated as part of the epoxy system, so it wears with the floor. Pedestrian paths, forklift lanes and hazard zones can each get their own color. Bring your layout to the estimate and we'll plan it.

Who should I hire for epoxy flooring in Union County, OH?

In Union County, Concrete Polish and Epoxy Ohio coats garages, basements, plant floors and farm shops with epoxy. Older houses in Marysville and Richwood get extra moisture checks, and industrial spaces can take a high-build coating. We work out of 5605 Westerville Rd in Columbus and give a written quote after a free on-site visit.

Is epoxy okay over radiant heat in a Union County basement?

Yes. Epoxy works over heated slabs as long as the heat is managed during installation. The system is usually turned down while coating and curing, then brought back up slowly. Grinding stays shallow to protect the tubes. We'll go over the details at the estimate.

We just moved into a new Union County subdivision. Should the garage be coated before winter?

Yes, that's a good idea. New concrete is vulnerable to salt damage in its first winters. Once the slab has cured about a month and passes a moisture test, it can be coated. Booking in fall leaves time before the cold arrives.

My older Union County home in Marysville has a basement with old tile. Can epoxy go over it?

Epoxy should go on bare concrete, so the tile and adhesive come off first. If the tile or mastic is old, test it for asbestos before removal. After grinding, repairs and a moisture test, the coating can go on. That gives a strong, lasting bond.

How slippery is epoxy in a Union County shop when the floor gets wet?

Smooth epoxy can get slick when wet. A flake broadcast or an added texture in the topcoat gives much better grip. Shops with lots of water often choose a heavier texture. We'll suggest the right level for how you use the space.

Our Union County warehouse floor has deep forklift ruts. Can epoxy fix them?

Ruts and spalls are repaired first with patching material and ground flat. Then a high-build epoxy goes on to protect the surface. Very deep damage may need more repair, which we'll explain at the estimate. The finished floor rolls smoothly again.

Is a metallic floor practical in a Union County home office?

Yes, for a home office it works well. Metallic epoxy gives a unique, glossy look and handles chair traffic with a clear topcoat. Use a chair mat under rolling chairs to reduce wear. It is easy to clean and stands out in any room.

I'm in Plain City on the Union County side. How soon can a crew come for an estimate?

Plain City is part of our regular service area, and estimates are usually easy to schedule. Call (614) 715-7108 to set a date. The estimate includes a look at the slab, a moisture test and a written quote, all free.

Service Area

Epoxy Coating for Union County from our Columbus shop

Our crew covers Union County from our Westerville Road shop in northeast Columbus. Every job starts with a free on-site estimate and a written quote from our own crew.

Concrete Polish and Epoxy Ohio5605 Westerville Rd., STE. A, Columbus, OH 43231(614) 715-7108Mon-Fri 8 AM-5 PM, Sat-Sun closed
Free Estimate

Ready for floors that turn heads in Union County?

Call or send the form and we will set up a free, no-obligation look at your concrete. Homes and businesses across Central Ohio.

Call nowFree estimate