Epoxy Coating in Delaware County, OH

Yes. Even new concrete has a smooth, dense top layer and often a curing compound that blocks the bond. Diamond grinding removes that and creates a profile the epoxy can grip. Skipping it is a main reason coatings peel. On a newer slab, the grind usually goes quickly.

A good system handles a trailer jack well, especially with a pad or puck under the foot. Point loads on a small area can mark any coating over time. A thicker high-build system with flake adds more resistance. Tell us what you store during the estimate so we can match the build to it.

Delaware County homeowners and businesses can hire Concrete Polish and Epoxy Ohio for epoxy floors in garages, basements and shops. Lots of our Delaware County work is new subdivision garages, while older homes near downtown Delaware need more patching and moisture testing first. Our own crew does the install, and you get a written quote after a free on-site visit.

Mid-tone blends tend to hide mud, salt and tire marks best. Very light colors show dirt quickly, and very dark ones show dust and salt residue. Blends with gray, tan and a bit of black are popular for that reason. We bring flake samples to the estimate.

Any time after the slab has cured about a month and passes a moisture test. Many owners do it before move-in so the garage is empty. If you've already moved in, clearing the garage for a few days is enough. Book the estimate early to line up a date.

An industrial high-build epoxy with a flake broadcast and a textured topcoat suits that kind of shop. It handles mud, mower decks and fuel drips, and it cleans up with a hose and squeegee. A cove base at the walls keeps water from sitting in the corners.

Epoxy follows the slab, so the slope stays, which is good for drainage. Spalls and low spots are filled and ground flat before coating, so the surface comes out smooth. If the floor has large dips or heaves, resurfacing may be needed first. We'll measure during the estimate.

It's a great fit for a bar or entertainment room. Metallic epoxy creates a deep, swirled look that comes out different on every floor. It needs a smooth, well-prepped slab and a clear topcoat for wear. Drink spills wipe up easily, which helps in a bar area.

Epoxy needs the slab and the air above a minimum temperature set by the product to cure properly. Heated garages can be done any time of year. Unheated ones may need temporary heat or a milder week. We'll check temperatures and plan the job around them.

Usually, yes. Cracks are cleaned out and filled, and broken edges are repaired before coating. Moving cracks can show through over time, so we'll point those out. A high-build epoxy is a strong fit for farm shops that see equipment, fuel and mud.